Troubleshoot my iPhone eSIM

We'll solve this together. Pick your symptom — most cases resolve in under 5 minutes.

Data-only plan — no traditional calls or texts

Good to know: the Simeo eSIM gives you internet access only. Traditional calls and text messages do not go through it. To call or write, use WhatsApp or FaceTime.

On arrival: the same settings everywhere

On arrival, in your phone's settings (not in the app):

  1. Turn on "Data Roaming" on your eSIM's line.
  2. Choose this line for mobile data.
  3. Fully restart the phone.
  4. Turn Wi-Fi off, wait up to 5 minutes, then open a page in your browser or in WhatsApp.

The app button only installs the eSIM card: these settings are what give you internet.

Your eSIM name may vary
In your settings, your Simeo eSIM may show under a name other than "Simeo": the name of the partner network in the country you are visiting, or the name you gave it yourself (for example "Travel"). That's normal. You have several lines and don't know which one is right? Open the settings page that lists your cellular lines, take a screenshot and send it to info@simeo.ca: we'll tell you which line is the right one. In the steps of this guide, we write "Simeo": replace that name with the one you see in your settings.
No service — iPhone shows "No Service"
Screenshot required
Before starting, take a screenshot of Settings › Cellular — it helps if you need to write us.
1

Toggle Airplane Mode for 30 seconds

Open Control Center, turn Airplane Mode ON, wait 30 seconds, then turn it OFF. This forces your iPhone to search for a new partner network.

2

Verify Simeo line is active

Settings › Cellular › Simeo. The "Turn On This Line" toggle must be ON.

If the problem persists after these steps, take a final screenshot and write us — we'll take over immediately.
Signal OK but no data
Screenshot required
Screenshot Settings › Cellular › Cellular Data (show us which line is selected).
1

Check "Cellular Data" set to Simeo

Settings › Cellular › Cellular Data: select "Simeo". The Canadian line isn't useful abroad.

2

Enable data roaming

Settings › Cellular › Simeo › Options: turn "Data Roaming" ON.

3

Turn off private tracking on the Simeo line (and your VPN)

Settings › Cellular › tap the **Simeo** line (not your main line) › **« Limit IP Address Tracking »**: turn it off. This setting is per line — turning Private Relay off globally in iCloud does not affect your eSIM. If the option isn't there, it requires an active **iCloud+** subscription: just move on to the next step. If you're using a VPN, disconnect it — it often blocks eSIM traffic.

If the problem persists after these steps, take a final screenshot and write us — we'll take over immediately.
Data loads nothing — Safari and apps don't respond
Screenshot required
Capture a speed test from fast.com or speedtest.net if possible.
1

Turn off "Limit IP Address Tracking" and your VPN

1. Turn off "Limit IP Address Tracking" on your eSIM's line (Settings › Cellular, your eSIM's line). 2. Disconnect your VPN, if you have one (Settings › VPN).

2

Fully restart the iPhone, then test with Wi-Fi off

Fully restart the iPhone. Hold the side button and a volume button until the "slide to power off" slider appears, drag it, wait 30 seconds, then turn the iPhone back on by holding the side button until the Apple logo appears. This step is mandatory: the iPhone only applies a changed setting after a real restart. Turning Airplane Mode on and off is not enough. Once the iPhone is back on, turn Wi-Fi off and test with Safari. If checking the APN is useful, it is done under "Signal OK but no data": read the value in the Simeo app ("My eSIMs", "More details") and enter it; never empty the field.

If the problem persists after these steps, take a final screenshot and write us — we'll take over immediately.
Stuck on EDGE / 2G — very slow connection
1

Force 5G/LTE manually

Settings › Cellular › Simeo › Voice & Data: choose "5G Recommended" or "LTE." Depending on your carrier, the status bar may show LTE instead of 4G — they're the same thing.

2

Manual network selection

Settings › Cellular › Simeo › Network Selection: disable Automatic, choose another available carrier. The search takes 30-60 seconds — keep the screen open. **Once your trip is over, turn Automatic back on** — otherwise your phone may stay without service when you get home.

If the problem persists after these steps, take a final screenshot and write us — we'll take over immediately.
QR code refused or already consumed
Screenshot required
Screenshot the exact error message displayed.
1

Check you haven't already installed the eSIM

Settings › Cellular — if "Simeo" already appears, the QR was consumed. Just activate the line, no need to reinstall. Note: if you see "Personal", "Travel", "Work" or "Data" (or another label) instead of "Simeo", that's normal — iOS assigns a default label when the eSIM hasn't been renamed.

See "Payment received, eSIM not delivered"
If nothing worked
Reply with the requested screenshots and write us at info@simeo.ca or via our contact page. We'll review your case within the day.
Cette page a été vérifiée le April 28, 2026 sur iOS 18.4. Si quelque chose semble obsolète, écris-nous à info@simeo.ca.